Wiring up my first two modules

[Appliancide*]

I have two sn voices ready to be wired up. Is ribbon cable ok or do I need twisted sets of wires for each pot/jack?

thanks,
Paul

[mark_olson]

You don't need to do the twist.
If you are using connectors of some kind that makes it make sense to use ribbon cable it will be fine.
I just used stranded wire, a lot of it

Good luck,

Mark

[Danno Gee Ray]

Wire size requirements are a function of current running through them at a given voltage. You will likely be dealing with milliamps at low voltage DC. Ribbon cable should be ok.